SMART CHARGING WITHIN YOUR CONNECTION

Dynamic load balancing: more charging points on your existing connection

Dynamic load balancing (also known as dynamic load management or DLM) automatically distributes the available power across all charging points at your site. Cars that are charging get more, full cars give up their share — and the main fuse doesn't blow. This lets you charge more vehicles at once on the grid connection you already have, even during grid congestion.

✓ Available on all our mobile chargers — from standalone charging stations to charging hubs and DC fast chargers

●●●   WIM platform — DLM Control

Live topology in the WIM platform: grid connection to DLM engine to charging points, with live amperage

Live from our platform: grid connection → DLM engine → charging points, remotely monitored

1

connection for all your units
all chargers share the power

4G

units wirelessly connected
no data cables or digging

0

changes to your electrical panel
as standard — optional metering module for live control

Grid congestion won't stop your charging project

At most depots and construction sites, you can charge more than you think — within the connection you already have. The difference is in how you distribute it.

Simple (static) load balancing gives each charger a fixed share of the power, even when no one is charging. Dynamic load balancing continuously checks which cars are actually drawing power and distributes it accordingly: cars that are charging get more, full cars give up their share. As a result, more charging points fit on the same connection, without the risk of overloading it.

Static distributionDynamic load balancing
Power distributionEach charger a fixed part — even when no one is chargingContinuous, based on who is actually charging
Car almost fullKeeps its full share reservedGives up its share — the capacity goes to whoever is charging
Charging points on your connectionFewer — every charger reserves its fixed share, even when nothing is chargingMore — on the same main fuse

Multiple mobile units work together as a single system

Our mobile chargers are connected to each other via 4G. If, for example, you add a second mobile charging hub and a few single mobile EV chargers to one connection, they share the available power between them. If a unit is added or removed, the system redistributes the power — automatically. That's how you add charging points without a larger grid connection: no grid upgrade, no waiting list at the grid operator.

  • No data cables or digging — everything runs wirelessly via 4G; just place it and you're done.

  • Combining brands — Chargers from different manufacturers work together in one system.

  • Scale up and down whenever you want — units can be added or removed during the rental period; we adjust the distribution remotely.

  • No work on your electrical panel — by default, we agree on the available power with you in advance; within that limit, the chargers divide it among themselves.

  • Optional: adapt to your other power usage — with a small metering module on the main connection, the available power is measured live instead of being preset. If a machine switches on, the chargers temporarily cut back. Just mention it when you request a quote.

We handle the configuration and monitoring remotely. We pick everything up again after your project is completed.

In practice — GEM Crailo, Bussum: 24 sockets temporarily installed there, spread across several connections. Each connection is controlled separately by load management, so residents and visitors can charge without overloading any one connection.

Graph from the WIM platform: allocated amperes per location over time, with the connection limit as a dotted line.

Allocated power per location, distributed live — the dotted line is the connection limit

Delivery van charging in a company parking lot at a ChargeMakers mobile charging hub
IN PRACTICE

This is how UPS charges its electric delivery vans at the depot: the vans are connected to the mobile charging unit, using the existing power supply. No permanent installation, no digging — and with dynamic load balancing, the system distributes the available power across all the vans parked there.

How many charging points fit on my connection?

More than you think. Here's a rough guide — and with dynamic load balancing you can combine units on top of that, all staying neatly within the total.

32A three-phase power

Mobile dual-socket EV charger

Two charging points on one standard three-phase power connection.

63A connection

Complete mobile charging hub

A mobile charging hub with six charging points runs on 63A.

IN PRACTICE
80A connection

Twelve charging points, fully dynamic

The DHL distribution center in Den Helder: twelve charging points on a single 80A connection, seamlessly distributed by our load balancing.

How many fit at your site depends on your main fuse, other consumption on the connection and how many hours the vehicles are parked. We work this out for you in the quote.

This is how it works

Charging check

We review your connection with you: main fuse, available capacity and how many hours your vehicles are parked.

Configuration

We set the available power and connect the units via 4G into a single system.

Placement

Delivered, connected, and remotely monitored. If your situation changes, we adjust the settings remotely.

Diagram: how dynamic load balancing works — four scenarios at a mobile charging hub with 8 charging points on an 80A connection

Frequently Asked Questions

Does this also work on a construction site power supply?

Yes. A mobile EV charger runs on as little as a 32A three-phase connection, a mobile charging hub on 63A. The system makes sure the total charging power stays within your connection — even with several units on site.

What happens if the 4G connection drops?

The chargers then fall back to a fixed, safe base profile that stays well within your connection. Charging continues as usual; as soon as the connection is restored, dynamic distribution takes over again.

Can I give priority to certain vehicles?

The distribution happens automatically: cars that are charging get more, full cars give up their share. Fixed priorities — for example, the van that leaves first in the morning — are not part of the system by default. If you need them, mention it in your quote request; we'll then see whether we can set it up for your site.

Is this the same as a home load balancer?

No. Home systems balance one charging point against the consumption of one house, usually via the smart meter. Our solution links multiple mobile charging units — mobile EV chargers, a mobile charging hub and DC fast chargers — into a single system on a business connection, with no installation in your electrical panel — and optionally with a small metering module on the main connection, so the chargers also adapt to your other power usage.

Is this an energy management system (EMS)?

Not quite. An energy management system (EMS) controls everything behind the meter: solar panels, a battery, machinery, sometimes even hourly energy prices. Our dynamic load balancing handles one part of that — the charging part. It measures what is available and distributes it live across the charging points, so your connection is never overloaded. With the optional metering module on the main connection it also takes into account what the rest of your building uses, and the chargers leave room for it.

What it does not do: control solar panels, a battery or other equipment. If you already use an EMS, that remains your central system — we agree on how much capacity the chargers get, and they stay within it.

How much does dynamic load balancing cost?

With a mobile charging hub, load balancing is included in the rental as standard: the six charging points share the power among themselves. If you combine multiple units on a single connection, we set up the distribution for your site and monitor it during the rental — we list this as a separate item in your quote. Want visitors or subcontractors to pay for their own sessions? That's possible too — read how it works on the page about paid charging with charge cards.

Request a quote

Briefly tell us what you want to charge and where — we'll get back to you quickly.
Where can we reach you?
Share a few details, such as start date, number of charging points and rental period. Not sure yet? No problem — we'll work it out together.

We review your request personally and help you work out the right number of charge points, power and connection.

Scroll to Top